ExtrusionParameters Struct Reference

Parameters for Extrude(). More...

Public Member Functions
	ExtrusionParameters (number ForwardDirectionDepth, number oReverseDirectionDepth)
	Constructor.

Public Attributes
number	ForwardDirectionDepth
	Depth of extrusion along the forward direction.
number	ReverseDirectionDepth
	Depth of extrusion along the backward direction.
Vector3D	Direction
	Extrusion direction. By default it is equal to the direction of the Z axis.
number	OutwardOffset
	Parameter sets the offset outside of the generatrix of the curve (default 0). Used to build a thin-walled body. If OutwardOffset=0 and InwardOffset=0 then solid body is built along the contour.
number	InwardOffset
	Parameter sets the offset inside from the generatrix of the curve (default 0). Used to build a thin-walled body. If OutwardOffset=0 and InwardOffset=0 then solid body is built along the contour.
number	ForwardDirectionDraftAngle
	Draft angle when extruding forward (0 by default). A positive value causes narrowing. If negative - extension. Used only when extruding in the direction along the Z axis.
number	ReverseDirectionDraftAngle
	Draft angle when extruding backward (0 by default). A positive value causes narrowing. If negative - extension. Used only when extruding in the direction along the Z axis.

Detailed Description

Parameters for Extrude().

Constructor & Destructor Documentation

ExtrusionParameters()

ExtrusionParameters::ExtrusionParameters	(	number	ForwardDirectionDepth,
		number	oReverseDirectionDepth )

Constructor.

Parameters

ForwardDirectionDepth	Depth of extrusion along the forward direction.
oReverseDirectionDepth	[opt] Depth of extrusion along the backward direction. Equals 0 if not set.