Room

The Room designation includes the following methods of constructing rooms:

	Automatically by point.
	Automatically by similar.
	Line by specifying two points.
	Arc by specifying three points.
	Arc by specifying start, center, end points.
	Circle by specifying a center point and radius.

You can combine a few construction modes such as Line by specifying two points, Arc by specifying three points and Arc by the start, center and end points when creating a room.

Please note that a room won't be created correctly if its borders are crossed.

Room parameters:

	Room number.
	Room name.
	Room height.
	Gross perimeter (automatically by the external boundaries).
	Gross floor area (automatically by the external boundaries).
	Gross volume (automatically by preset settings).
	Level. It determines room level.
	Vertical offset. Determines the vertical offset of a room relatively to the insertion point.

The room parameters may be modified in the process of construction and editing. Press Enter to fix the parameter values.

To determine Net floor area, Net ceiling area, Net wall area, Net volume, and Net perimeter, the boundaries of the room must be in contact with the enclosing structures.

All the snaps and accurate construction are available for room construction.

In order to see the boundaries of the room having been created, select it by clicking on the marker.

To edit a room, use handles.

See also