Release Notes

You are here: Release Notes

Renga Release Notes

Current version 8.2

Trim or extend to corner action for grid line, wall, beam, stair, ramp, railing, rebar, wall foundation, model line, drawing line.
Ability to specify a base line as the boundary for the Trim or Extend action .
SD#7324374, SD#7362717, SD#7394617, SD#7451521 – The ability to group filters by topic.
The ability to place holes in roofs.
SD#7332418, SD#7447626 – The ability to create a hole through multiple objects.
SD#7453933 – Added new quantities of holes: Overall height, Overall width.
SD#7448059 – Ability to control the text style for model grid lines.
The ability to change the linear size of a drawing section created with the Automatically by view construction mode, without losing the association with the section in the model.
SD#7277739, SD#7374186, SD#7451513 – The Arrange command in the engineering system tabs works only for selected objects.
Significantly improved performance of Hide, Isolate, Show All, Visual Style commands in projects with many objects.
The Reinforcement unit editor is divided into Rebar styles and Reinforcement unit styles.
SD#7453143 – A significant increase in the velocity of schedule calculation.
SD#7407490, SD#7376920 – API. Ability to get reinforcement styles and reinforcement unit style and rebar style parameters.
SD#7455872 – API. A significant increase in the speed of getting objects.

Bug fixes

SD#7454284 – Incorrect IFC exporting of holes in assemblies.
SD#7453022, SD#7454307 – "Unknown error" in some cases of IFC Export.
SD#7435598 – The crash when moving a route in some cases.
SD#7426877, SD#7425364 – "Unknown error" in some cases when opening a project.
SD#7444943 – Incorrect display of holes on a drawing in some cases.

Version 8.1.12666

SD#7448079, ...SD#7448071, SD#7436371, SD#7434513, SD#7397438, SD#7375679, SD#7365668, SD#7359696, SD#7357330, SD#7354350, SD#7341373, SD#7333382, SD#7305241, SD#7304742, SD#7304739, SD#7304469, SD#7290214, SD#7274036, SD#7268007, SD#7268003, SD#7264634, SD#7243507, SD#7234685, SD#7214573, SD#7197121 – Trim or extend action for grid line, wall, beam, stair, ramp, railing, rebar, wall foundation, model line, drawing line.
SD#798362, ...SD#7450002, SD#7448602, SD#7448108, SD#7421787, SD#7406583, SD#7383971, SD#7382239, SD#7375690, SD#7374999, SD#7368188, SD#7352387, SD#7347774, SD#7347772, SD#7331482, SD#7324773, SD#7311150, SD#7306360, SD#7306048, SD#7305486, SD#7304465, SD#7303152, SD#7299403, SD#7298228, SD#7290339, SD#7274698, SD#7272870, SD#7265323, SD#7256861, SD#7227517, SD#7205803, SD#7201398, SD#7197573, SD#7185293, SD#7183426, SD#7180192, SD#7169574, SD#7151673, SD#7142077 – The ability to control the display of true line thickness in Settings.
The ability to place holes in floor, isolated foundation and wall foundation.
SD#7409042 – Improved smoothness when scaling 3D View.
The "Show thumbnails instead of icons" option is disabled by default.
The “Enable Lighting” option is enabled by default.
Warnings when launching, saving, exporting, and synchronizing a project about the lack of a valid license.
SD#7449773 – Significant reduction in time required to build a route.
SD#7451525 – The date and time format in a project journal complies with ISO 8601 requirements.
SD#7451523 – Project journal fields are enclosed in quotes.
SD#7453143 – For projects with a large number of objects, the speed of the schedule calculation is significantly increased.
API. The ability to get a route from a port.

Bug fixes

SD#7421504 – When exporting to PDF/DWG/DXF, the hatch line thickness does not match the thickness specified in the project.
SD#7439321, SD#7451474, SD#7431920, SD#7446305 – "Unknown error" in some cases when opening a project.
SD#7449827 – Incorrect number of bars in automated beam reinforcing in some cases.
SD#7453150 – The crash when calculating expressions in some cases.
SD#7454284 – Incorrect export of holes to 3D formats.
SD#7447997 – API. "UserDefinedEnum" type parameters return the localized elements of the enumeration.
SD#7447999 – API. Error when getting the style "None" and "Default".
SD#7451534 – API. Error while getting LayerQuantities.
SD#7454048 – API. Speed decrease when getting IQuantity of rooms.

Version 8.0.11468

The new licensing system from Guardant SLK.
The ability to change the topic of level, section and elevation when editing from the schedule.
SD#7233286, SD#7235080, SD#7285725, SD#7359699, SD#7401845 – The ability to control the grid bubble offset of a model grid line.
SD#7253771 – The ability to control the display of the grid line bubble on the level and in 3D View.
SD#7424294, ...SD#7418713, SD#7307895, SD#7204092, SD#7256560, SD#7371276, SD#7336896, SD#7336114, SD#7326018, SD#7315095, SD#7304942, SD#7300827, SD#7286433, SD#7273077, SD#7255860, SD#7255823, SD#7210574, SD#7197570, SD#7175282, SD#7163994, SD#7158628, SD#7157045 – The ability to place holes in beams and columns.
Import IfcVoidingFeature type objects placed in walls as holes.
Mirror of engineering system routes.
The ability to add and remove rebar vertices and change the type of rebar segment.
SD#7268463 – The ability to connect pipe accessories and duct accessories to engineering systems.
When deleting a section in the model, the section designation created with the Automatically by View construction mode is automatically deleted from the drawing.
STDL. The ability to define the port role to connect pipe and duct accessories to engineering systems.
STDL. The ability to specify the STDL version when building a style template.
API. The ability to get an object from IModelObjectCollection by its unique identifier.
SD#7350340, SD#7439845 – API. The ability to set expression and CSV export sign for an assigned property.

Bug fixes

SD#7435598 – The program crashed in some cases when trying to copy light fixtures.
SD#7439072 – Incorrect symbolic railing display on drawing.
SD#7435621, SD#7436267, SD#7436341, SD#7439514 – The crash when edit assembly topic in some cases.
SD#7429616 – The crash in some cases of IFC Export.
SD#7435742 – API. Renga 7.4 binary compatibility error with extensions built with RengaSDK 2.32 or earlier.
SD#7436106 – API. An error occurs when nonparametric objects imported from IFC get from the IModelObjectCollection.
SD#7439276 – API. The “Default” style name is not returned.

Version 7.4.10487

SD#7394965, SD#7299051, SD#7340128 – When creating a project from a template, saves the reference to the model view and drawing view parameters.
Added "Material.Color" parameter for Rebar, Beam, Column, Wall foundation, Stairs, Ramp, Plate, Layer, Isolated foundation in schedules, legends, filters and tag styles .
The ability to select object mark, object style and material color from the existing ones when editing an object from the schedule.
The ability to change the object style name when editing from the schedule.
SD#7409042 – Smooth navigation in 3D View has been improved.
SD#7270640, ...SD#7274701, SD#7295253, SD#7305149, SD#7311466, SD#7335712, SD#7359687, SD#7383904, SD#7423260 – The ability to work with the String data type in formulas.
SD#7233286, SD#7235080, SD#7253771, SD#7285725, SD#7359699, SD#7401845 – The ability to control the grid bubble offset of a drawing grid line.
SD#7424294, ...SD#7418713, SD#7401770, SD#7375687, SD#7362489, SD#7357862, SD#7347768, SD#7307895, SD#7285860, SD#7280663, SD#7275681, SD#7263350, SD#7204092, SD#7203340, SD#756273, SD#7138921, SD#7160134, SD#7210559, SD#7256560, SD#7274780 – Modeling Tool Hole. The ability to place holes in walls.
SD#7430387, SD#7340391, SD#7337617 – The ability to manage layer properties.
SD#7398470 – API. The ability to get engineering system object style parameters.
SD#7428483 – API. The ability to get the port the route is connected to.

Bug fixes

SD#7432920 – Incorrect symbol display of Manual call point category objects.
SD#7416588 – Incorrect import of equipment from IFC in some cases.
SD#7432066 – The crash when moving a window in some cases.
SD#7424814 – Crashes in some cases when using the Flip command on the Duct fitting.
SD#7430770, SD#7432189 – It does not apply the No pattern setting for Hatch in Display Styles.

Version 7.3.9998

Bug fix:

SD#7429891, SD#7429883, SD#7429862, SD#7429861 – License file processing is incorrect.

Version 7.3.9972

Bug fixes

SD#7426877, SD#7425364 – "Unknown error" in some cases when opening a project.
SD#7425013, SD#7426889, SD#7427476, SD#7425807, SD#7426494, SD#7407998 – In some cases, the crash when deleting objects.
SD#7420739 – In some cases, the crash when a common schedule column is added.
SD#7424751 – The crash when opening a project in some cases.
SD#7424249 – Boolean and logical data type values incorrectly applied in Filters dialog.
SD#7425901 – The crash in some cases when interacting with a display style.

Version 7.3.9206

The ability to edit object style parameters in the schedule.
Extended possibilities of drawing grid lines created with the Automatically by view construction mode: possibility to change the linear size of the grid line in the drawing without loss of associativity, automatic deletion of the drawing grid line when deleting the grid line in the model.
Significantly reduced the time required to execute the Show All command.
SD#7350352 – Added has a value operator in Filters.
SD#7341351, SD#7313909, SD#7313828, SD#7175043 – Display objects without edges on a smooth transition.
SD#7416892, SD#7416894 – API. The ability to get a list of engineering system object categories in the project.
SD#7419689 – API. The ability to get pipes, ducts, electrical lines.

Bug fixes

SD#7400498 – API. Parameter names are not filled in.
SD#7406779 – Do not consider empty values for properties and parameters in operators such as does not equal, does not contain, does not begin with, and does not end with.
SD#7416890 – There are no symbols for insertion in the schedule.
SD#7335487 – In some cases, deleting property assignments crashes.

Version 7.2.8109

Replaced the progress bar indicating an undefined status at the start of the project with a progress bar indicating a defined status.
Improved rebar detail display.
SD#7274680, SD#7258411 – The ability to assign reinforcement styles to assembly elements .
SD#7308175, SD#7264638, SD#7157168 – The reinforcement object style can be used to create reinforcement details within an assembly.
SD#7151350, ...SD#7196773, SD#7230062, SD#7237583, SD#7294314, SD#7302028, SD#7311649, SD#7338337, SD#7355167, SD#7362248, SD#7375957, SD#7394609, SD#7331479, SD#7247363 – The ability to edit object parameters and properties, object style properties in the schedule.
API. Type identifiers have been added for linear, diametrical, radial, and angular model dimensions.

Bug fixes

SD#7408387 – "Unknown error" in some cases of IFC Export.
SD#7384939 – The crash when opening a project in some cases.
SD#7400677, SD#7407010 – "Unknown error" in some cases when opening a project.
SD#7402670 – API. Some object types do not return IObjectWithMark.

Version 7.1.6879

The ability to manage properties of linear, diameter, radial and angular dimensions, model hatches and model texts.
SD#7294389, SD#7290486, SD#7289620 – The ability to display and use dimension, model hatch, and model text parameters and properties in filters, schedules, legends, and tags.
API. The ability to get ports of engineering equipment and their parameters.

Bug fixes

SD#7397700 – The crash when selecting a wiring accessory style in some cases.
SD#7397424 – In some cases, prolonged project opening may occur.
SD#7391112 – The crash when opening a project in some cases.
SD#7393365 – The crash on use of boolean type in style template description.

Version 7.0.51495

The Renga product is now available in two editions: Renga Standard and Renga Professional.
The ability to manage engineering system object categories in project templates and projects.
SD#7303169, ...SD#7327561, SD#7335249, SD#7342515, SD#7356056, SD#7366222, SD#7366223, SD#7377637, SD#7385669 – The ability to use STDL (Style Template Description Language).
SD#7335936 – The ability to manage model line properties.
SD#7278792, SD#7289620, SD#7290486, SD#7310989, SD#7325320, SD#7332430, SD#7335936 – The ability to display and use model line parameters and properties in filters, schedules, legends, and tags.
Export model lines to CSV.
Improved window, door, and opening collaboration capabilities in some cases.
SD#7383355 - API. The ability to get a Renga version.
SD#7302793 – API. The ability to edit Project/Site/Building properties.
New font versions. The angle designation has been updated to a commonly used one and the degree symbols have been reduced in size.

Bug fixes

SD#7385825, SD#7386087, SD#7386055, SD#7384970 – The crash on legend update in some cases.
SD#7381801 – Incorrect minimum dimensions of the electric distribution board.
SD#7353252 – Unable to copy an object to the clipboard in some cases.
SD#7387466 – The crash when adding a command to the Action Panel from the API.
SD#7387131 – "Unknown error" in some cases of PDF Export.
SD#7388413 – "Unknown error" in some cases when opening a project.

Version 6.1.50957

The ability to automatically place crosses on the routes of pipe and duct systems.
The ability to create a new style of pipe, duct and electrical equipment in a category when editing an object.
SD#7365970 – API. The ability to control the visibility of the elements of the extension user interface.
API. Creating an Operation with Undo.
API. The ability to undo the operation.
SD#7376123, SD#7378760 – For projects with a large number of assemblies, the speed of the schedule calculation is significantly increased.

Bug fixes

SD#7376984, SD#7377074, SD#7377750, SD#7376794, SD#7376094 – Garbled text in PDF file when GOST A, GOST B, ISO CA, and ISO CB fonts are used in text.
SD#7375958 – Incorrect navigation in the "Camera Mode" via VDI.
SD#7380615 – The crash when trying to paste a T-shaped system route into a different project.
SD#7366709 – The crash when opening a project in some cases.
SD#7381910 – "Unknown error" in some cases when opening a project.
SD#7378987 – Performance loss in some cases when creating dimensions on an object in a drawing.

Version 6.0.50429

Changing the position of pipe, duct and electrical equipment without removing the route.
The ability to change the style of plumbing, mechanical and electrical equipment in a category without removing the route.
The ability to change the direction of a route segment connected to plumbing, mechanical or electrical equipment.
Added tracking snap for the possibility of placing a route segment collinearly to the port direction.
Dynamic definition of Mechanical Equipment system categories.
Several users can collaborate on a Wall at the same time.
Several users can collaborate on a Mechanical Equipment at the same time.
Several users can collaborate on an Equipment at the same time.
Several users can collaborate on a Wiring Accessory at the same time.
Several users can collaborate on a Lighting Fixture at the same time.
Several users can collaborate on an Electric Distribution Board at the same time.
Several users can collaborate on a Pipe at the same time.
Several users can collaborate on a Duct at the same time.
Several users can collaborate on an Electrical circuit line at the same time.
Several users can collaborate on a Duct Accessory at the same time.
Several users can collaborate on a Duct Fitting at the same time.
Several users can collaborate on a Pipe Accessory at the same time.
Several users can collaborate on a Pipe Fitting at the same time.
Several users can collaborate on a Route at the same time.
Several users can collaborate on a Window at the same time.
Several users can collaborate on a Door at the same time.
A significant increase in the velocity of schedule and legend calculation.
Updated GOST A and GOST B fonts.
Added ISO CA and ISO CB fonts.

Bug fixes

SD#7371312 – Incorrect navigation in the "Camera Mode" via Remote desktop.
SD#7365051 – Duplication of materials when copying objects via the clipboard in some cases.
SD#7360154 – Incorrect display of assemblies in views in some cases.
SD#7310088 – API. The context menu is not created via API for assembly view.
SD#7364076 – The crash in some cases of IFC Export.
SD#7368520 – Crash when trying to create an object after deleting all levels in the project.

Version 5.12.49996

Conversion error of previous version projects in some cases.

Version 5.12.49908

Several users can collaborate on a Railing at the same time.
Several users can collaborate on an Wall foundation at the same time.
Several users can collaborate on a Beam at the same time.
Dynamic definition of Equipment system category.
Dynamic definition of Wiring Accessory system category.
Dynamic definition of Lighting Fixture system category.
Dynamic definition of Electric Distribution Board system categories.
SD#7343422 – API. Ability to create and edit properties with the data type Enumeration.
SD#7354641 – API. Project creation/opening/saving events.
SD#7362547 – API. Get Project/Site/Building IDs.
Removed Renga API v.1.2 support.

Bug fixes

SD#7348103 – Forced OS reboot after application installation.
SD#7358558 – The crash when getting the quantity value in some cases.
SD#7360168 – The mark of the parent object is missing in some cases.
SD#7358137 – Problems with Russian-language project file names.
SD#7361738 – The crash when opening a schedule in some cases.
SD#7348434, SD#7353679 – Incorrect object top and bottom elevation for rebar in assembly.
SD#7361319 – "Unknown error" in some cases when opening a project.

Version 5.11.49403

Several users can collaborate on a Column at the same time.
Several users can collaborate on a Floor at the same time.
Several users can collaborate on an Opening at the same time.
Dynamic definition of Route Point system categories.
Dynamic definition of Plumbing Fixture system categories.
Several users can collaborate on a Route Point at the same time.
Several users can collaborate on a Plumbing Fixture at the same time.
Several users can collaborate on a Connection at the same time.
Several users can collaborate on a Rebar at the same time.
Added export to IFC of PredefinedType and SystemType attribute values for ports of engineering systems objects.
New categories of pipe accessories: Strainer with drain, Three way ball valve, Three way bypass valve, Three way control valve.

Bug fixes

SD#7342834, SD#7348830 – Identical strings in schedule/legend are not merged in some cases.
SD#7341328 – In some cases, the beams do not connect.
SD#7340734 – "Unknown error" in some cases of IFC Export.
SD#7351003 – The view does not update when changing the Wireframe visual style to Monochrome in some cases.
SD#7350538 – Resets the camera position in the 3D View when changing navigation mode.
SD#7353493 – The crash when adding objects to the model in some cases.
SD#7353732, SD#7353654, SD#7355308, SD#7355771 – "Unknown error" in some cases when opening a project.
SD#7353450, SD#7355595 – The crash when printing on Windows 11 22H2.

Version 5.10.48974

Several users can collaborate on a Stair at the same time.
Several users can collaborate on a Ramp at the same time.
Several users can collaborate on a Model line at the same time.
Several users can collaborate on a Model hatch at the same time.
Several users can collaborate on an Assembly at the same time.
Several users can collaborate on an Element at the same time.
Several users can collaborate on a Roof at the same time.
Several users can collaborate on a Stair Railing at the same time.
Several users can collaborate on a Ramp Railing at the same time.
Several users can collaborate on a Room at the same time.

Bug fixes

SD#7333423 – High peak RAM usage in some scenarios.
SD#7342660 – It is not possible to apply a size for arcs of plate.
SD#7335487 – The crash in some cases of property deletion.
SD#7340802 – Optimization of memory allocation in some cases.
SD#7341942 – The Renga Collaboration Server installation program does not create folders for storing projects and project journals.
SD#7318970, SD#7326039, SD#7338773 – The crash when C3D import in some cases.
SD#7342658 – The ability to change the size of the property editing window.
SD#7342261 – The crash when pasting from the clipboard in some cases.
SD#7341306, SD#7346932 – "Unknown error" in some cases when opening a project.
SD#7331719 – The text of the Callout is moved to a new line when exporting to PDF in some cases.
SD#7299580 – The model is not imported from the SAT format in some cases.
SD#7343068 – API. The GUID in the help is given in lowercase characters.
SD#7345938 – Layers are not created in a layered material in some cases.
SD#7346647 – Incorrect tag on the view in some cases.
SD#7347335 – Texture images are not created when exporting to OBJ and COLLADA formats.
SD#7342506, SD#7345730, SD#7341390, SD#7338616, SD#7343035 – "Unknown error" in some cases of IFC Export.

Version 5.9.48395

The ability to automatically sync changes during collaboration.
Several users can collaborate on a Plate at the same time.
Several users can collaborate on an IFC object at the same time.
Several users can collaborate on an Isolated foundation at the same time.
API. The ability to get the number of the drawing in it's Topic as a string.

Bug fixes

SD#7335825, SD#7336307 – When an object is hidden, it's reinforcement is displayed in a 2D view.
SD#7337503, SD#7337504 – Incorrect unit of measurement of the Angular dimensional constraints in profile-based styles.

Version 5.8.48114

Several users can collaborate on a Grid Line in a model at the same time.
Several users can collaborate on an Elevation.
Several users can collaborate on a Section in a model at the same time.
Several users can collaborate on a Level at the same time.
Several users can collaborate on a Model text at the same time.

Bug fixes

SD#7331120 – The crash when opening an application in some cases.
SD#7327661, SD#7334658 – The crash when opening a drawing in some cases.
SD#7333207, SD#7334033, SD#7334141, SD#7334543, SD#7335797 – The crash when editing a model in some cases.
SD#7329596 – Unable to execute Move and Create copy commands for Duct Accessory.
SD#7334740 – The crash when applying a specific profile form to a beam style.
SD#7335085 – The crash at a certain beam rotation angle in some cases.

Version 5.7.47640

Several users can collaborate on a Plate style at the same time.
Several users can collaborate on a Column style at the same time.
Several users can collaborate on a Beam style at the same time.
Several users can collaborate on a Plumbing Fixture style at the same time.
Several users can collaborate on a Equipment style at the same time.
Several users can collaborate on a Pipe Fitting style at the same time.
Several users can collaborate on a Pipe Accessory style at the same time.
Several users can collaborate on a Mechanical Equipment style at the same time.
Several users can collaborate on a Duct Fitting style at the same time.
Several users can collaborate on a Duct Accessory style at the same time.
Several users can collaborate on a Wiring Accessory style at the same time.
Several users can collaborate on a Lighting Fixture style at the same time.
Several users can collaborate on an Electric Distribution Board style at the same time.
Several users can collaborate on a Dimension in a drawing at the same time.
Several users can collaborate on a Section in a drawing at the same time.
Several users can collaborate on a Dimension in a model at the same time.
SD#7300852 – The ability to change the size of the Hatches dialog and the Import hatch dialog.

Bug fixes

SD#7327008 – Extra space in localization.
SD#7325403 – Uneven element scaling is not taken into account when exporting to IFC.
SD#7327580 – Incorrect line height in dialogs for batch export to PDF/DWG/OXPS.
SD#7327403 – Wrong grammatical number in spelling.
SD#7330031 – It is not possible to specify a circuit breaker panel height more than 400 mm.
SD#7327669 – Column and beam style sizes reset when copied to another project in some cases.
SD#7327512, SD#7330600, SD#7332274 – The crash when opening a project in some cases.
SD#7328572, SD#7326808, SD#7326720, SD#7327392, SD#7330048 – "Unknown error" in some cases when opening a project.
SD#7326966 – The crash when changing the object mark in some cases.

Version 5.6.46733

Several users can collaborate on a Line in a drawing at the same time.
Several users can collaborate on a Tag at the same time.
Several users can collaborate on a Hatch in a drawing at the same time.
Several users can collaborate on a Grid Line in a drawing at the same time.
Several users can collaborate on a Electrical conductor style at the same time.
Several users can collaborate on a Duct style at the same time.
Several users can collaborate on a Reinforcement style at the same time.
Several users can collaborate on a Reinforcement unit at the same time.
Several users can collaborate on a Connection reinforcement style at the same time.
Several users can collaborate on a Pipe style at the same time.
Several users can collaborate on an Electrical circuit line style at the same time.
Several users can collaborate on paragraphs in a drawing text at the same time.
Several users can collaborate on a Callout at the same time.
Several users can collaborate on a Text style at the same time.
Several users can collaborate on an Element style at the same time.
Improvements in collaboration on Window Style.
SD#7309327 – API. The ability to get the drawing number in the topic.

Bug fixes

SD#7310456 – Unification of the display order of column, beam, plate style parameters.
SD#7324078 – The crash when a property with a logical data type is used in the filter.
SD#7317557 – API. Error while getting IPropertyDescription from IPropertyManager.
SD#7319301 – There is no parameter localization in the column reinforcement style.
SD#7319120 – The value of the distance from the actuator axis of the handwheel in the ball valve style is not saved.

Version 5.5.45742

Several users can collaborate on a Text in a drawing at the same time.
Several users can collaborate on a View in a drawing at the same time.
Several users can collaborate on a Axonometric View in a drawing at the same time.
Several users can collaborate on a Object in a drawing at the same time.
Several users can collaborate on a Schedule in a drawing at the same time.
Several users can collaborate on a Table in a drawing at the same time.
Several users can collaborate on a Legend in a drawing at the same time.
Several users can collaborate on System style at the same time.
API. The ability to create screenshot of the 3D View.

Bug fixes

SD#7313951 – Incorrect geometric representation of dimension arrows when exporting to PDF.
SD#7314898 – API. The help description does not match the actual content of enum ParameterType.
SD#7312609 – The crash when receiving a corrupted font from the OS.
SD#7315860 – The project does not open after saving the project imported from IFC with incorrect encoding.
SD#7316032 – Incorrect operation of the Tag on a view with section in parallel planes.

Version 5.4.45063

Several users can collaborate on frame type, mullions, panel orientation in the window style at the same time.
Several users can collaborate on a display style at the same time.

Bug fixes

SD#7313098, SD#7313091, SD#7313084, SD#7312704 – It is impossible to change the geometric dimensions of the fan, cross, elbow, tee.
SD#7312045 – The crash when getting a wall section in some cases.
SD#7313987 – Spelling mistake in localization.
SD#7313322 – "Failed to load style templates" in some cases when creating a new project.
SD#7313818 – Wall surface hatch is not displayed on assembly object in some cases.
SD#7313746 – Incorrect beam end cutting when changing the direction of the baseline.

Version 5.3.44700

Several users can collaborate on a reinforcement grade at the same time.
Several users can collaborate on a tag style at the same time.
Several users can collaborate on an order and composition of the schedule and legend style columns at the same time.
SD#7303162 – Maintaining the component locations in the Project Explorer during and between application sessions.
SD#7309327 – API. The possibility to get the layout style and topic of drawing.

Bug fixes

SD#7310207 – The crash when pasting an assembly style in the Project Explorer in some cases.
SD#7308564 – The crash when accessing the quantity "Area" from the API in some cases.
SD#7310659 – The crash when two or more properties of the Project Explorer components are set to zero at the same time.
SD#7308561 – High memory consumption when using textures for materials.
SD#7306122, SD#7306590 – "Unknown error" in some cases of IFC Export.
SD#7306439 – The crash when changing the View depth plane offset parameter in some cases.
SD#7306591 – Lengthy schedule calculation in some cases.
SD#7301978 – Hatching from a PAT file is imported upside down.
SD#7307100, SD#7309157 – "Unknown error" in some cases when opening a project.
SD#7307533, SD#7307172 – API. An error occurred while getting the list of project property identifiers.
SD#7307165 – The crash in some cases of IFC Import.
SD#7307939 – Spelling mistake in localization.
SD#7307768 – Missing space in topic name.
SD#7299598 – Lines in assembly are not exported in some cases.
SD#7307868 – Incorrect display of data in schedule in some cases.
SD#7307175 – API. Incorrectly returned a group of layered material.
SD#7309024, SD#7310116 – Cannot set associative dimension in some cases.

Version 5.2.43525

The ability to manage the properties of the Project, Site, Building in the Object Properties editor.
Several users can collaborate on Project Information properties at the same time.
The ability to set an expression for the properties of the Project, Site, Building.
Several users can collaborate on a door style at the same time.
Several users can collaborate on a window style at the same time.
The thickness value is included in the layer name when exporting to IFC.
Several users can collaborate with the properties of the drawings, tables, assemblies, topics, schedules in the same time.
Several users can collaborate on layers of the layered material at the same time.
Several users can collaborate on a filter at the same time.
Several users can collaborate on a schedule and on a legend style at the same time.
The ability to create several columns with the same parameter, property or quantity in the schedule and legend style.
Support of temporary licenses.
SD#7302795, SD#7302963 – API. The ability to get the style list of the Element, Door, Window, Profile, Material, Layered material.

Bug fixes

SD#7303305 – The crash when editing a wall in some cases.
SD#7300226, SD#7302247 – The crash when editing a roof in some cases.
SD#7296418 – The IFC objects are not imported in some cases.
SD#7283530, SD#7287089, SD#7294771, SD#7299047 – The crash in some cases of synchronizing.
SD#7301180, SD#7303737 – The crash when placing a wiring accessory on an assembly.
SD#7298311 – The crash when editing an opening in some cases.
SD#7303743, SD#7304071 – The crash when opening a project in some cases.
SD#7301266 – Projects larger than 1 GB are not synchronized.
SD#7304460, SD#7304462 – Wall surface hatch is not displayed on Views in some cases.

Version 5.1.42156

SD#7149733, SD#7243507, SD#7210540, SD#7247356 – The ability to sort drawings in a topic. Added a new quantity of the drawing - Number.
SD#7202904, SD#7202796, SD#7243507, SD#7287227, SD#7294841 – The ability to schedule material layers. Ability to CSV export material layers.
Several users can collaborate on Project Information parameters at the same time.
SD#7286026 – Automatic generation of a "safe" file name from the drawing name when exporting.
Optimization of the performance of snaps on solids with a large number of complex curves.
The selection of the face in the view direction when placing wiring accessories.
Increased application performance in some scenarios.
Reuse the geometric representation of beams when exporting to IFC and 3D CAD model formats.

Bug fixes

SD#7292486 – "Unknown error" in some cases of STP insertion.
SD#7293256 – "Unknown error" in some cases when exporting to PDF.
SD#7293784 – The crash when opening a project in some cases.
SD#7294764 – Keyboard shortcuts do not work in the Profiles dialog in some cases.
SD#7286403 – The material color of the plate, columns and stairs in the assembly is not updated.
SD#7295572, SD#7295847 – The crash when opening a drawing in some cases.
SD#7295404 – Incorrect IfcAdvancedBrep of the arc wall when exporting to IFC in some cases.
SD#7293495 – "Unknown error" in some cases when opening a project.
SD#7293752 – API. Invalid color format.
SD#7294831 – Artifacts are displayed on the view in some cases.
SD#7296947 – The crash when creating the filter in some cases.
SD#7294939 – The IFC project is not imported in some cases.
SD#7295718 – Part of the section is not exported to DWG and PDF in some cases.
SD#7290486 – Incorrect the Isolate command applying for a filter with a Level object in the 3D View.

Version 5.0.40988

SD#7201108, SD#7234543 – Added new wall quantities: Net side area, Net side area left, Net side area right, Gross side area, Gross side area left, Gross side area right.
SD#7234543 – Added new quantities of walls, floors and roofs: Gross mass, Gross volume.
Added a new floor quantity – Gross area.
SD#7274150 – Reuse the geometric representation of objects when exporting to C3D.
The "Display assembly contents" option in schedules and legends.
SD#7265251, SD#7264150 – Section plane offset and View depth plane offset for the Object tool in drawing.
SD#7285856 – The maximum height of the table/schedule/legend rows has been increased from 150 to 300 mm.
SD#7287521 – The ability to apply filters in the Assembly tab.
SD#7285264, SD#7290162 – Drawings with section views open much faster.
SD#7286911 – Added a new assembly quantity – Net mass.
SD#7196384 – The ability to change the window aspect ratios in the Pipe system parameters and Duct system parameters dialogs.
SD#7159650, ...SD#7145411, SD#7170010, SD#7177276, SD#7199579, SD#7263322, SD#7268177 – The ability to group components in the Project Explorer.
The ability to manage the collaboration server access key.
The ability to snap to objects of Plumbing fixture, Equipment, Mechanical equipment, Lighting fixture, Wiring accessory, Electric distribution board.
Added context menu commands Check, Uncheck, Check All and Uncheck All for multiple-selection list items of Display Styles, Legend Styles, Schedule columns, Common schedule columns, Geometric representation of objects in IFC export, Pipe system parameters, Duct system parameters and Electrical system parameters.
The symbolic level of detail has been changed for the section of columns and beams formed by the custom profile.
API. Added new quantities for layers of walls, floors and roofs: GrossArea, GrossSideArea, GrossSideAreaLeft, GrossSideAreaRight, GrossVolume, GrossMass.
Removed the ability to automatically convert projects created before version 4.0.

Bug fixes

SD#7285128, SD#7285441, SD#7285861 – The crash when creating a project by some templates.
SD#7283965 – "Unknown error" in some cases of IFC Export.
SD#7287234 – Incorrect display of assembly elements.
SD#7280355 – The material color does not apply to the pipe and duct details.
SD#7247526 – The material colors are not applied when exporting to solid model formats in some cases.
SD#7291474 – Incorrect wall geometric representation in some cases when exporting to IFC with the "Export geometric representation without cutting" option.