You are here: Modeling > Designations > Elevation

Elevation

The Elevation designation is intended to create an elevation designation to get elevation views for viewing and editing.

Creating an elevation

In order to create a new elevation, do the following:

  1. On the Tools panel, click Designation – the Elevation tool.
  2. Specify the location point of designation by using object snaps.
  3. Then, specify the view direction. To specify the rotation angle use tracking snaps.

Elevation parameters:

Elevation name.

Topic.

The parameters may be modified during the construction process and when editing. Press Enter to fix the parameter values.

In contrast to most objects, the elevation designation is built by point and angle. Use one of the handles to change the view direction when edit an elevation.

Elevation symbol is linked to the working plane. If a working plane is moved to another level, the elevation symbol remains on the working plane. Thus, you can open the elevation for viewing and editing in any position of the working plane.

Preview and editing elevation view

To open the elevation for viewing and editing, do the following:

  1. Right-click the elevation designation.
  2. On the shortcut menu, click Open.
  3. Select the elevation name tab.

or

  1. Click Open Project Explorer.
  2. Left-click the elevation thumbnail.

Objects on elevation views are displayed as projections or sections, depending on the location of the objects relative to the elevation designation in the 3D View.

In the elevation view, you can create and edit objects available on the Tools panel. When creating objects on the elevation, use the snaps of existing objects. If snap is used, the object will be placed in the anchoring plane, parallel to the elevation designation. If the snap is not used when creating an object on the elevation, the object will be placed in the plane of the elevation. When editing or moving an object beyond a handle, the selected handle rest in the original plane parallel to the elevation plane.

The principles of work with tools are the same on both 3D and 2D views, but the Cubic, Cylindrical and Spherical measure modes work only in 3D View. If one of these measure modes is required to build an object, go to 3D View.

If you remove the elevation designation, it will not affect any objects that were previously created in the elevation view.

To complete the documentation for the elevation view, go to the drawing tab and create view.

Смотрите такжеSee also