The components in the Project Explorer are grouped. If there are many components in a group, then for convenience, you can additionally group the components by properties or topics.

To group drawings, levels, assembly styles, sections, elevations, schedules, or tables:

1. At the end of the group header, click Group by .
2. Select component property or topic to group.

For correct grouping, properties and / or component topic have to be set.

To sort the received subgroups, use the Ascending / Descending items in the Group by menu.

You can group components in different ways in different Project Explorer tabs. To collapse / expand a group, click on the heading.

Double left click on the project component opens it in a new tab.

There is a context menu for managing components in the Project Explorer. To select a command from the context menu, right-click on the project component.

To open, set property values or a section to multiple project components at the same time:

1. Select the components one by one holding Ctrl.
2. Select the command in the context menu.

In addition, to copy and paste drawings, assembly styles, schedules and tables, you can use the Primary Panel Copy (Ctrl+C) and Paste (Ctrl+V) commands. You can paste a component copied in the Project Explorer into any Renga project.

When a drawing is created, it is assigned a ordinal number within the topic. To change the order of drawings in the topic:

1. At the end of the group header, click Drawing order .
2. In the drop-down list, select the Topic where you want to change the order of the drawings.
3. Select the drawing and move it to a new position using the Up and Down buttons on the right side of the window.
4. Click OK.

You can use the reference to the drawing number when preparing or filling out the title block.