You are here: Modeling > IFC Model

IFC Model

The Paste link... command allows you to paste link to a IFC Models in following formats:

To paste an IFC model link:

  1. On the Primary panel, select the Paste – Paste link...
  2. Select a file and click Open.
  3. Set IFC Model parameters:

    Attachment to coordinate system.

    Link name. Displays the link name defined in Links editor.

    IFC Model rotation angle.

    Level. Determines the IFC Model level.

    Vertical offset. Determines the vertical offset of the IFC Model relatively to the insertion point.

  4. Specify the insertion point.

The parameters may be modified both in the construction and editing process. Press Enter to fix the parameter values.

All the snaps and accurate construction are available when working with IFC model. In order to modify, copy or move an IFC Model, select it by the Select tool.

All IFC Models that are added into the project are displayed in the Links editor. To manage links, use Manage styles – Links on the Primary panel.

To import a IFC model into Renga, use the Open project... command.

Смотрите такжеSee also