Duct

The Duct tool allows to create ducts between duct system objects connected by route.

To create a duct:

1. Select the Duct tool.
2. Set the Duct parameters:

	Duct style. Defines a duct parameters and properties.
	Duct rotation angle.
	Mark. It appears in the schedules. Necessary for insertion into the drawing.

3. Specify an insertion point of the duct on a route.

The location of the duct in the horizontal section of the route is defined by the route parameter Slope .

When you create a duct accessoryor duct fitting on a route section, the duct located on the section gets divided into two objects.