The Print command in Renga is intended to print the current drawing as well as an image of the 3D view, level, section, elevation, assembly style.
To print a table or a schedule, you need to insert it into the drawing. |
To print a drawing, do the following:
The sheet determines the printing area. Everything beyond the sheet is not printed. For correct printing, the sheet size and orientation in the printer settings should be the same as in Renga. |
To print the 3D View, level, section, elevation or an assembly style do the following:
The printing area is determined by the current size of the window. |
The image will be fit into the selected size page. |