Wall foundation

You are here: Modeling > Wall foundation

The Wall foundation tool includes the following methods of constructing foundations:

	Automatically by similar;
	Line by specifying two points;
	Arc by specifying three points;
	Arc by specifying start, center, end points;
	Circle by specifying a center point and radius.

Foundation shape:

	Rectangular;
	Trapezoidal.

Foundation parameters:

	Wall foundation position relative to baseline. When working with wall foundations, the baseline is indicated in yellow.
	Wall foundation horizontal offset. Can take negative values.
	Wall foundation height.
	Wall foundation thickness top.
	Wall foundation thickness.
	Level. Determines the foundation level.
	Vertical offset. Determines the vertical offset of a wall foundation relatively to the baseline.
	Material.
	Reinforcement style.
	Mark. It appears in the schedules. Necessary for insertion into the drawing.

Parameters may be modified both in the process of foundation construction and in case of editing. Press ENTER to fix the parameter values.

All the universal operations are available for construction of foundation.

To snap any objects to the wall foundation, use one of the snap lines: left, center, right.

In order to select the snap line, move the mouse cursor to its expected position.

When foundations are built or edited, baselines are highlighted in yellow on the current work plane.

If a snap to the baseline is used when a foundation is constructed, then foundations will automatically be mated.

In order to modify, copy or relocate a foundation having been created, select it using the Select tool.