Rebar

The Rebar tool includes the following methods of constructing separate rebars:

	Line by specifying two points;
	Arc by specifying three points;
	Arc by specifying start, center, end points.

Rebar construction modes may be combined.

Rebar parameters:

	Стиль арматурного стержня. Defines rebar's diameter, grade and material.
	Level. It determines rebar level.
	Vertical offset. Determines the vertical offset of a rebar relatively to the insertion point.
	Mark. The parameter is used to insert objects into a drawing.

Point Parameters:

	Bend radius. It defines the bend radius of the rebar with the center at the selected point.
	Offset point in the plane.

Parameters may be modified both when constructing and editing the rebar. Press ENTER to fix the parameter values.

In order to change the point parameters:

1. Select the rebar.
2. Select the handle.
3. Edit the parameters.
4. Fix the handle position.

All the universal operations are available for construction of rebar. To edit a rebar, use handles.

In order to modify, copy or relocate a rebar having been created, select it using the Select tool.

See also